Máquina embaladora de forragem para silagem elétrica trifásica máquina embaladora de palha para armazenamento verde máquina embaladora de forragem horizontal fabricante

                           Three-phase electric silage baler silage straw baler horizontal bagging silage baler

	￥16999	￥16999	￥16888	￥16999
	￥16999	￥16999	￥21800	￥16999

Forage storage feed baler corn stalk baling and wrapping machine silage baler briquetting machine silage round baler is a fixed baling machine, which can reliably pick up and bale corn stalks after kneading by a kneading machine. This product is carefully designed by technicians to avoid the phenomenon that the density of the bales after baling by other manufacturers is small and easy to rot after wrapping. The density of the corn stalks after baling is large, which is convenient for wrapping and silage. At the same time, other dry and fresh grasses can also be bundled. It is a fixed straw round baler for livestock: it consists of a straw picker, a grass drum, a sprocket transmission mechanism, a rope box, a rope guide rod and an early warning device, a hydraulic control mechanism and other components. When baling, it automatically guides the rope, automatically picks up wheat straw, automatically bales, and automatically cuts the rope. It can also change the baling of one of the mechanical equipment in the breeding industry by adjusting the size of the groove wheel.

Forage storage feed baler Corn stalk baling and film wrapping machine Silage baling and briquetting machine The utility model discloses a silage round bale baler, aiming to provide a silage round bale baler with high round bale density and less feed loss. It includes a walking chassis, a transmission system, a hydraulic system, a swing hopper, a fixed hopper, an electronic control system, a baling mechanism and a wrapping net device arranged on the baling mechanism. The driving shaft, the tensioning shaft, the driven shaft and the four supporting shafts of the baling mechanism are respectively supported and mounted on the two side walls of the compression chamber, and the two chains on both sides synchronously and sequentially pass through the sprockets on the driving shaft, the tensioning shaft, the four supporting shafts and the driven shaft, so that the two chains on both sides form an arc-shaped closed circular ring, and the inner ring of the circular ring is supported on the circular slideway located on the two side walls of the compression chamber, and the pressure rollers are evenly installed on the two ring-shaped chains on both sides. The utility model is suitable for the operation of baling chopped high-moisture silage into round bales. The bale density is large, and the bales are not scattered or messy. It is an ideal feed baling equipment for livestock breeding enterprises.


The silage baling and wrapping machine is a new type of silage product developed by Qufu Runfeng Machinery Equipment Co., Ltd. according to customer needs. The all-in-one machine consists of two parts: baling and wrapping.

The working principle of the special feed silage baling and film wrapping machine for farms is to feed the fixed bin manually through the front of the machine. When the bale is large enough that the fixed bin and the movable bin are in contact with a certain density, the inert roller above the movable bin and the signal wheel on the left will rotate evenly, and the operator presses the winding clutch handle, the machine starts to reciprocate and tie the rope, and the hemp rope is automatically cut off after one circle of rope wrapping. The bin is opened immediately to release the bale, and the bale falls directly onto the rotating frame of the film wrapping machine. The film is pulled out by hand and the rotating button is started. The rotating frame drives the bale to rotate. The operator should simultaneously and quickly press the film toward the bale, and rotate it for one circle with the bale, and then immediately let go. The forage film is gradually wrapped around the outside of the bale layer by layer, and the bale revolves with the rotating frame. When the film is wrapped to the set number of layers, the clutch is automatically disengaged, the rotating frame stops, and the operator cuts the forage film between the bale and the film transport frame, presses the broken end of the forage film into the overlapping part of the end face of the bale, and one person moves the wrapped bale into a cart, pushes it away and arranges it neatly.

                               List of other breeding equipment mainly sold by the company

Feed spreader truck (diesel type)

Feed spreader (electric)

TMR mixer (belt type)

TMR mixer (direct connection)

TMR mixer (double shaft direct connection type)

Feed mixer (double shaft)

Disc crusher

Silage reclaimer (5-7m)

Diesel manure cleaning truck (three-wheeled)

Diesel manure cleaning truck (four-wheel type)

Silage baler (fully automatic)

feces separator

If you have any questions, please consult customer service.