Rocker switch double rocker switch KCD6 double warped cat eye light power switch LED light double switch

Technical indicators:

1. Rated working voltage and current Rating 3A/6A/15A 250V

2. Operating temperature range: -25+85 ℃

3. Contact Resistance <0.03Ω

4.Actuating Force 1.3+0.5N

5.Insulation Resistance >100MΩ

6. Switching Life: 10,000 times

Introduction to boat switch: Boat switch is also called wave switch. Its structure is the same as that of button switch, except that the button handle is replaced with boat shape. Boat switch is often used as power switch of electronic equipment. Its contacts are divided into single-pole single-throw and double-pole double-throw. Some switches need to be equipped with lights and indicator lights. Application range: Rocker switches are used in water dispensers, treadmills, computer speakers, battery cars, motorcycles, plasma TVs, coffee pots, power strips, massage machines, etc. They are mainly used in household appliances. The test method of the life of the rocker switch: mainly test the number of opening and closing, until it is damaged. If you don't need to do it manually, you can use a small motor to drive the eccentric opening and closing switch, and use a counter to record the number of times! This switch requires safety certification. If the product is sold domestically, it uses CQC. If it is sold abroad, it depends on which country it is sold to, such as UL in the United States, CUL in Canada, and VDE, ENEC, TUV and other safety certifications in European countries. Rocker switch classification: 1. SPST: 1 moving contact and 1 static contact. Only 1 channel 2. Single-pole double-throw: 1 moving contact and 2 stationary contacts (the stationary contacts on both sides can be connected separately) 3. Double-pole single-throw, 2 moving contacts and 2 stationary contacts, with 2 channels 4. Double-pole double-throw, 2 moving contacts and 4 static contacts, with 4 channels (the 2 static contacts on both sides can be connected separately) Fault problem of rocker switch: There is a metal sheet inside the boat-shaped switch with a spring fulcrum in the middle. The spring is displaced and the plastic bracket is aging and deformed, so the switch is not flexible. You can disconnect the power and take a look. If the plastic parts are not damaged, it may be restored. The neutral line inside the switch is straight through and has nothing to do with the switch components. Therefore, if the switch trips and the air switch is on, the insulation layer of the neutral line passing through the switch is damaged. You can cut off the damaged section and rewire it. Pay attention to the insulation. It may also be that the foot of the indicator light is short-circuited, so just rewire it.。

All products in this store are priced at factory prices, excluding VAT. If you need a VAT invoice, please contact customer service to agree on the tax point. Thank you for your visit.